六合联盟开奖结果

产品分类

联系我们

深圳市奋华自动化科技有限公司

电话:0755-23015665-801

手机:13418972091

邮箱:anna@fenhuamv.cn

传真:0755-23015665-802

网址:www.fenhuamv.com

地址:深圳市宝安区福永凤凰大道282号104

acA3800-10gm

您的当前位置: 首 页 >> 产品中心 >> BASLER

acA3800-10gm

  • 所属分类:BASLER

  • 型号:acA3800-10gm
  • 点击次数:
  • 发布日期:2018/09/28
  • 在线询价
详细介绍


六合联盟开奖结果_acA3800-10gm

BASLERac1/" target="_self">acA3800-10gm

The acA3800-10gm baslerweb.com/en/basler_ace_gige.htm" style="color: rgb(36, 97, 164); text-decoration: none;">Basler ace GigE camera with an ON Semiconductor MT9J003 mono CMOS sensor delivers 10 frames per second at 10 MP resolution.

六合联盟开奖结果_Basler ace GigE Cameras

In this topic 

  • Specifications

    • Camera Dimensions and Mounting Points

    • Maximum Allowed Lens Intrusion

    • Stress Test Results

    • General Specifications

    • Spectral Response

    • Mechanical Specifications

  • Requirements

    • Ethernet Cable

    • I/O Cable

    • Camera Power

    • Opto-Coupled I/O Input Line

    • Opto-Coupled I/O Output Line

    • Temperature and Humidity

    • Heat Dissipation

    • Environmental Requirements

    • Electrical Requirements

    • Circuit Diagrams

    • Cable Requirements

  • Physical Interface

    • Camera Connectors

    • Connector Pin Numbering and Assignments

  • Precautions

  • Installation

  • Features

Specifications

General Specifications

SpecificationacA3800-10gm

Resolution
(H x V Pixels)

3840 x 2748

Sensor Type

ON Semiconductor MT9J003

Progressive scan CMOS

Rolling shutter

Optical Size

1/2.3"

Effective Sensor Diagonal

7.9 mm

Pixel Size (H x V)

1.67 μm x 1.67μm

Frame Rate
(at Default Settings)

10 fps

Product Line

ace classic

Mono / Color

Mono

Image Data Interface

Fast Ethernet (100 Mbit/s)

Gigabit Ethernet (1000 Mbit/s)

Pixel Formats

See Pixel Format.

Synchronization

Via hardware trigger

Via software trigger

Via free run

Exposure Time Control

Programmable via the camera API

Camera Power Requirements

Power over Ethernet (PoE) 802.3af compliant supplied via Ethernet connector

12–24 VDC supplied via I/O connector

≈3.7 W when using Power over Ethernet

≈3.3 W @ 12–24 VDC when supplied via I/O connector

I/O Lines

1 opto-coupled input line

1 opto-coupled output line

Lens Mount

C-mount

Size (L x W x H)

42.0 mm x 29 mm x 29 mm (without lens mount or connectors)

60.3 mm x 29 mm x 29 mm (with lens mount and connectors)

Weight

<90 g

Conformity

CE (includes RoHS), UL Listed, FCC, GenICam, GigE Vision, IP30, IEEE 802.3af (PoE), REACH

The EU Declaration of Conformity is available on the Basler website

Software

Basler pylon Camera Software Suite (version 4.0 or higher)

Available for Windows, Linux x86, Linux ARM, and OS X

Accessories

Cables for your camera model

Lenses for your camera model

Additional accessories for your camera model

Spectral Response

六合联盟开奖结果_ON Semiconductor MT9J003 Spectral Response (From Sensor Data Sheet)

The spectral response curve excludes lens characteristics and light source characteristics.

Mechanical Specifications

Camera Dimensions and Mounting Points

六合联盟开奖结果_Mechanical Dimensions (in mm) for Cameras with C-mount Lens Mount

Maximum Allowed Lens Intrusion

→ See Maximum Allowed Lens Intrusion.

Stress Test Results

→ See Stress Test Results.

Requirements

Environmental Requirements

Temperature and Humidity

Housing temperature during operation0–50 °C (32–122 °F)
Humidity during operation20–80 %, relative, non-condensing
Storage temperature-20–80 °C (-4–176 °F)
Storage humidity20–80 %, relative, non-condensing
Housing temperature according to UL 60950-1max. 70 °C (158 °F)
Ambient temperature according to UL 60950-1max. 30 °C (86 °F)

UL 60950-1 test conditions: no lens attached to camera; no heat dissipation measures; ambient temperature kept at 30 °C (86 °F).

Heat Dissipation

→ See Providing Heat Dissipation.

Electrical Requirements

Camera Power

  • Power supply via Power over Ethernet (PoE):  Power must comply with the IEEE 802.3af specification.

  • Power supply via I/O connector: The operating voltage is 12–24 VDC. As a minimum, 10.8 VDC must be supplied. To avoid damaging the camera, a maximum of 30 VDC must not be exceeded.

Opto-Coupled I/O Input Line

Voltage

Description

30 VDC

Absolute maximum. This voltage must never be exceeded. Doing so may damage the camera and voids the warranty.

0–24 VDC

Safe operating range.

0–1.4 VDC

Indicates a logical 0 (with inverter disabled).

>1.4–2.2 VDC

Region where the logic level transition occurs; the logical status is not defined in this region.

>2.2 VDC

Indicates a logical 1 (with inverter disabled).
  • Minimum current: 5 mA

  • Current draw: 5–15 mA

  • If the camera is connected to a PLC device, Basler recommends using a cable that adjusts the voltage level of the PLC to that of the camera.

Opto-Coupled I/O Output Line

Voltage

Description

30 VDC

Absolute maximum. This voltage must never be exceeded. Doing so may damage the camera and voids the warranty.

3.3–24 VDC

Safe operating range.

<3.3 VDC

Unreliable I/O output.
  • Leakage current: <60 ?A. Actual leakage depends on operating temperature and production spread of electronic components.

  • Maximum load current: 50 mA

  • Minimum load current: Not specified. Consider the following:

    • Leakage current will have a stronger effect when load currents are low.

    • Propagation delay of the output increases as load currents decrease.

    • Higher-impedance circuits tend to be more susceptible to EMI.

    • Higher currents cause higher voltage drops in long cables.

Circuit Diagrams

→  See Circuit Diagrams for Basler ace Cameras.

Cable Requirements

Ethernet Cable

  • Use a high-quality Ethernet cable. Use of shielded CAT 5E or better cables with S/STP shielding is recommended.

  • Use either a straight-through (patch) or a cross-over Ethernet cable.

  • As a general rule, applications with longer cables or applications in harsh EMI conditions require higher category cables.

  • Close proximity to strong magnetic fields should be avoided.

  • Basler recommends using Ethernet cables from the Basler Vision Componentsrange.

I/O Cable

  • The I/O cable must be shielded.

  • The I/O cable must have a cross-section of at least 0.14 mm? (close to AWG26).

  • Use a twisted pair wire cable.

  • Maximum recommended cable length: 10 m

  • Camera-side connector: Hirose micro plug (part number HR10A-7P-6S) or equivalent

  • Close proximity to strong magnetic fields should be avoided.

  • If you are supplying power to the camera via Power over Ethernet, the I/O cable will not be used for power supply. However, you can still use the cable to connect to the I/O lines.

  • Basler recommends using I/O cables from the Basler Vision Components range:

    • Opto-I/O cable, 10 m (blue cable): For use with the opto-coupled I/O lines of your camera. Does not provide camera power. Therefore, when using this cable, you must provide power via Power over Ethernet (PoE).

    • Power-I/O cable, 10 m (gray cable): For use with the opto-coupled I/O lines of your camera. Unlike the opto-I/O cable (blue cable, see above), this cable provides camera power.

    • Opto-GPIO Y-cable, 2 x 10 m (yellow-blue cable): Offers two separate wires. One can be used to connect the opto-coupled I/O lines of your camera. The other one can be used to provide camera power.

    • Power-I/O PLC+ cable, 10 m (gray cable): For use with the opto-coupled I/O lines of Basler cameras connected to a programmable logic controller (PLC). It adapts the signal level for zero voltage from PLC level (<8.4 VDC) to TTL level (<1.4 VDC).  

Physical Interface

Camera Connectors

六合联盟开奖结果_Camera Connectors

Connector

Description

Ethernet connector
  • 100/1000 Mbit/s Ethernet connection to the camera

  • If power is not supplied via I/O connector: Power over Ethernet (PoE)

  • 8-pin RJ-45 jack
    Recommended mating connector: 8-pin RJ-45 plug (snap-in or with locking screws)

  • When using locking screws, note the horizontal orientation of the screws.

I/O Connector
  • If power is not supplied via Power over Ethernet (PoE): Power supply

  • Hirose micro receptacle (part number HR10A-7R-6PB)
    Recommended mating connector: Hirose micro plug (part number HR10A-7P-6S)

Connector Pin Numbering and Assignments

六合联盟开奖结果_Pin Numbering for the I/O Connector

PinLineFunction
1-12–24 VDC Camera Power
2Line 1Opto-coupled I/O input line
3-Not connected
4Out 1Opto-coupled I/O output line
5-Ground for opto-coupled I/O lines
6-Ground for camera powe


相关标签:?德国BASLER,acA3800-10gm价格,acA3800-10gm批发

上一篇:BASLER acA640-90uc
下一篇:acA1300-200um

最近浏览:

在线客服
  • 客户服务客户服务
  • 客户服务客户服务
  • 六合联盟开奖结果_淘宝旺旺淘宝旺旺
六合联盟开奖结果_二维码

扫描二维码

分享 六合联盟开奖结果_一键分享
欢迎给我们留言
六合联盟开奖结果-六合历史开奖记录-六合现场开奖结果
Baidu
sogou